Step Sequencer

info

Please note that this is a work in progress, and the design is subject to change. The current colors of the UI elements are for reference only, as our primary focus has been on functionality rather than visual design at this stage.

Sequencer Main

Sequencer Main

Main UI for the Step Sequencer

Page Selector

Select the page of the sequencer. Hold down to disable page or adjust length

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes.

Note Pad

Note Pad for entering notes

Play

Play the sequence

Record

Record the Sequence

Octave Down

Movw the octave down (With Shift, it will nudge the sequence left)

Octave Up

Move the octave up (With Shift, it will nudge the sequence right)

Shift

Shift the sequence

Duplicate

Duplicate the section or note

Clear

Clear the sequence or Step

Undo?

Undo the last action. Not sure if I can implement this. Might be some other function

Action Menu

Tap to enter the action menu

Sequencer Step View

Sequencer Step View

Hold each step to add notes or actions. Or you can hold down a note and add into steps. You can also click the free slots on the step (the four gray pad on top right to manually add an action)

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Note Pad

Note Pad for entering notes

Play

Play the sequence

Record

Record the Sequence

Octave Down

Movw the octave down (With Shift, it will nudge the sequence left)

Octave Up

Move the octave up (With Shift, it will nudge the sequence right)

Shift

Shift the sequence

Duplicate

Duplicate the section or note

Clear

Clear the sequence or Step

Undo?

Undo the last action. Not sure if I can implement this. Might be some other function

Action Menu

Tap to enter the action menu

Sequencer Step Add Action

Sequencer Step Add Action

The next free slot will start flashing and you can add actions into it. (Press empty pad or the slot to cancel)

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration. There will be more actions than the listed, those are just here to give an idea on how the UI will be.

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Note Action

Add a note action to the step

CC Action

Add a CC action to the step

PC Action

Add a PC action to the step

Pitch bend Action

Add a Pitch bend action to the step

Change BPM

Add a Change BPM action to the step. (Affects the entire sequencer)

Change Swing

Add a Change Swing action to the step. (Affects the entire sequencer)

Mute/Unmute Track

Add a Mute/Unmute Track action to the step.

Solo/Unsolo Track

Add a Solo/Unsolo Track action to the step.

Action Menu

Tap to enter the action menu

Sequencer Step Setting - Note Action - Note

Sequencer Step Setting - Note Action - Note

Configure the Note of the Note Action

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Property - Note

Select which note to trigger.

Property - Gate

Select how long the note is triggered.

Property - Velocity

Select how hard the note is triggered. (Initial Value)

Property - Substep

Select which substep to trigger.

Property - Change Rate

Select if the value changes over time and how fast.

Property - Probability

Select how likely the event is triggered.

Note Pad

Note Pad for select note

Octave Selector

Select the octave of the note

Action Menu

Tap to enter the action menu

Sequencer Step Setting - Note Action - Gate

Sequencer Step Setting - Note Action - Gate

Configure the gate of the note action

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Property - Note

Select which note to trigger.

Property - Gate

Select how long the note is triggered.

Property - Velocity

Select how hard the note is triggered. (Initial Value)

Property - Substep

Select which substep to trigger.

Property - Change Rate

Select if the value changes over time and how fast.

Property - Probability

Select how likely the event is triggered.

Gate Length

Gate length up to 16, highest note can be trimmed to 1/6 by tapping it.

Infinite Gate

Make the gate infinite until the next note.

Zero Gate

Make the gate zero length. (Used to stop the note)

Soft Trigger

Send the note as aftertouch instead of note on

Action Menu

Tap to enter the action menu

Sequencer Step Setting - Note Action - Velocity

Sequencer Step Setting - Note Action - Velocity

Configure the velocity of the note action

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Property - Note

Select which note to trigger.

Property - Gate

Select how long the note is triggered.

Property - Velocity

Select how hard the note is triggered. (Initial Value)

Property - Substep

Select which substep to trigger.

Property - Change Rate

Select if the value changes over time and how fast.

Property - Probability

Select how likely the event is triggered.

Velocity Length

Select up to 32 velocity levels. (Need 0 velocity? Use zero gate instead)

Action Menu

Tap to enter the action menu

Sequencer Step Setting - Note Action - Microstep

Sequencer Step Setting - Note Action - Microstep

Configure the Microstep of the note action

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Property - Note

Select which note to trigger.

Property - Gate

Select how long the note is triggered.

Property - Velocity

Select how hard the note is triggered. (Initial Value)

Property - Substep

Select which substep to trigger.

Property - Change Rate

Select if the value changes over time and how fast.

Property - Probability

Select how likely the event is triggered.

Microstep Selector

Select one of the 6 microsteps to trigger the note

Action Menu

Tap to enter the action menu

Sequencer Step Setting - Note Action - Change Rate

Sequencer Step Setting - Note Action - Change Rate

Configure the value change rate of the action

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Property - Note

Select which note to trigger.

Property - Gate

Select how long the note is triggered.

Property - Velocity

Select how hard the note is triggered. (Initial Value)

Property - Substep

Select which substep to trigger.

Property - Change Rate

Select if the value changes over time and how fast.

Property - Probability

Select how likely the event is triggered.

Change Rate Selector

Select the change rate of the value. Top note has 4 sub steps, each big step is 16, each sub step is 4. This is how much value that will change on each quarter note.

No Rate of Change

Do not change value over time

Increase

Increase the value over time

Decrease

Decrease the value over time

Action Menu

Tap to enter the action menu

Sequencer Step Setting - Note Action - Change Rate

Sequencer Step Setting - Note Action - Change Rate

Configure the value change rate of the action

Sequence

Note sequence of the sequencer. Hold down to fine tune step notes. White means it is currently selected for configuration

Note Selector

Each step can have up to 8 actions, including note, cc, bpm change, etc. Color means what's it's current function. Full bright means it is currently selected for configuration. Tap at dim white to create new action

Property - Note

Select which note to trigger.

Property - Gate

Select how long the note is triggered.

Property - Velocity

Select how hard the note is triggered. (Initial Value)

Property - Substep

Select which substep to trigger.

Property - Change Rate

Select if the value changes over time and how fast.

Property - Probability

Select how likely the event is triggered.

Probability Selector

Select the cProbability of Triggering this action. (Each step is 12.5%)

Action Menu

Tap to enter the action menu

Sequencer Action Menu

Sequencer Action Menu

Menu for the Sequencer

Save

Save the current sequence

Rotate Device Left

Rotate the device so that the top of the device is on the left side.

Rotate Device Down

Rotate the device so that the top of the device is on the bottom side.

Rotate Device Right

Rotate the device so that the top of the device is on the right side.

Brightness Control

Tap to cycle through brightness levels. Hold to enter brightness control menu.

Track Selection

Select the track to edit

BPM & Swing

Change the BPM and Swing of the sequence

Undermained feature

I will find something to add here

sequencer Setting

Enter the Sequencer Setting

System Setting

Enter the System Setting

Note Pad Mode

Change the Note Pad Mode. Cycle through Scaled, Chromatic, isomorphic, drum

Scale

Change the Scale of the sequence

Force Sensitivity

Toggle Force Sensitivity

MIDI Port & Channel

Change the MIDI Port and Channel

Track Color

Change the color of the track

Timeline View

Enter the Timeline View

Track Enabled

Enable or disable track. (Hold this key down and you can tap other tracks to enable or disable them)

Track Solo

Enable or disable track solo (Hold this key down and you can tap other tracks to solo them)

Track Recoding

Enable or disable track recording (Hold this key down and you can tap other tracks to record them)

Play

Play the sequence

Go to sequencer View or Exit App

Tap to go back to the sequencer View. Hold to exit the app.