跳到主要内容

Building on Windows

Install Git​

Git is a crucial tool for version control in development. If you haven’t installed it yet, follow these steps:

  1. Check if Git is installed by running git --version in your terminal.
  2. If Git isn’t installed, follow the official installation guide to set it up for your system.

Install Make​

Make is essential for building projects, especially when working with embedded systems. Matrix OS use Make on top of chip vendor provided build system to achieve cross platform.

  1. Install Chocolatey, we will be using it to get the latest make. See Set up Chocolatey to install Chocolatey.
  2. Restart your terminal to make sure Chocolatey is ready to use.
  3. Install Make 
    choco install make
  4. Restart your terminal to make sure Make is ready to use.
  5. Confirm the installation by typing: 
    make --version
    This command should output the version of Make, confirming it is installed correctly.

Clone Matrix OS repo​

This step help you download the code of Matrix OS and get it ready for building.

  1. Open your Command Prompt or preferred terminal.

  2. Clone the Matrix OS repository with the following command:

    git clone https://github.com/203-Systems/MatrixOS.git

  3. Navigate to the cloned repository:

    cd MatrixOS

  4. Initialize Matrix OS repo

    git submodule update --init

Install ESP IDF​

ESP IDF (Espressif IoT Development Framework) is the vendor provided tool chain and SDK for the SOC used in Mystrix. It is a critical component of Matrix OS for Mystrix and it's important to have it installed for building Matrix OS.

This process seems daunting at first, but it's actually pretty easy.

  1. Install ESP-IDF, you really only need to download the online installer and install ESP-IDF version V5.3.1. You dont't need to follow rest of the page. ESP-IDF: Standard Setup of Toolchain for Windows
  2. Go to the installer folder and run the install.bat to finish install. If you didn't change the default install path, it should be at C:\espressif\v5.3.1\install.bat.

Build Matrix OS​

Now you should completed all requirements. Time to build Matrix OS!

  1. Load ESP-IDF. You will need load ESP-IDF in your current terminal session. You can either use the ESP-IDF installed "ESP-IDF V5.3 CMD" short cut, or run C:\espressif\v5.3.1\export.bat in a terminal instance.

In the long run, you will want to automate this. If you are using VS Code, you can modify the MatrixOS.code-workspace file and replaced the .bat path with yours.

(The reason this needed to be do is because this way you can have multiple different version of IDF and use a specific one, it also loads associated python and tool chains into the session)

  1. Go to the root folder of Matrix OS if your terminal isn't there already.

  2. Run this command to build Matrix OS

make DEVICE=Mystrix build
  1. Upload to your Mystrix. Make sure your Mystrix is in upload mode already.

Run this command to install psutil python package. You only have to do this once

pip install psutil

Run this command to upload your compiled Matrix OS to your Mystrix.

make DEVICE=Mystrix uf2-upload
  1. Your Mystrix should start flashing auto enter the newly compiled Matrix OS.

Build Commands​

Here are some useful build commands you can use in Matrix OS:

  • clean - Cleans the build.
  • fullclean - Cleans the build more thoroughly. Use this if you encounter undefined references or missing files.
  • build - Builds Matrix OS based on the default config (OS/parameter.h).
  • build-release, build-rc, build-beta, build-nightly, build-dev - Builds Matrix OS in various modes. build-dev enables USB logging (see Debug Matrix OS).

You can chain commands together like:

make DEVICE=Mystrix clean build uf2-upload

Comments